Since 2002 , focus on manufacturing and supplying various kinds of bonded ferrite magnets


permanent magnets offer a big boost: moving stock and materials around the shop, usually involves slinging steel from a hoist or using a forklift. lifting with permanent magnets can significantly simplify many of these tasks.

by:Maghard      2020-03-08
\"One person can do some work and it will take two people if you don\'t handle the work or even if you use the clip,\" explains asupervisor, a spring steel supplier in Kansas.
\"In many cases, we assemble the sub-parts and ship them out.
All of this involves a lot of processing and many parts are within the scope of these magnetic lifts.
They saved us time and extra labor to connect the dog and stopped the iron chain around the dog. \" [
Slightly] Illustrations
Permanent magnet magnetic lift gains hold power from permanent magnet, no electrical connection, fixture or special cable is required.
Once they are hoisted on cranes, cranes or other lifting equipment, they can start to work. So-
The so-called permanent magnet is a shape or machined part made of special materials, such as ceramics, aluminum nickel alloys or rare earth materials, which are magnetized by exposure to a strong electric field.
Once magnetized, these materials maintain magnetic properties at a wide range of temperature, physical impact and other environmental conditions-
So the name of the permanent magnet.
The magnetic lift consists of permanent magnets placed in the residence so that both the north and south poles can contact the surface of various types of objects they are designed to lift.
This concentrates their magnetic force in the contact area and gives them the ability to hold the workpiece outstanding through the air gap.
Most workloads within the weight range of a well
Regardless of the surface finish, the designed lifter can be handled safely.
In the \"on\" position, when the black workpiece is maintained, the magnet of the lift generates a complete magnetic loop.
When the magnetic network is closed, it is usually reoriented by rotating the lever, the magnetic field, the circuit is disconnected, or \"short circuit\" so that there is no net holding force used on the workpiece.
A very weak temporary magnetic field can be induced in the contact of some iron material magnetic lift.
This area is basically limited to areas of direct contact.
Once released, most ferrousobjects soon lost all the measurable traces of this residual magnetic.
Small physical shocks associated with the release of a part usually immediately demagnetized it.
Materials and parts made of higher alloy steel and some stainless steel tend to maintain longer inductive magnetic properties.
Despite the steel, the effect is usually short-lived.
Life does not matter. [
Slightly] Illustrations
The selection of multi-function lifts varies in the ability to handle various workpieces common in the manufacturing, manufacturing and repair environments.
Some lifting magnets are designed to lift flat objects and curved objects at the same time, while others can only pick up one or the other.
The store should make sure that the configuration and rod design of the magnetic lift they purchased fit their application.
For a company in Washington that makes hydraulic and pneumatic rotary actuators, this option is easy.
The company uses magnetic motors to load and unload parts from CNC and manual machines in the itsmaching department.
A senior Foreman said that the lift purchased by his company was made with v-
The grooves in shape enable them to continuously handle round loads and flat steel, which is important because most of the components he works on have round cylindrical surfaces. [
Slightly] Illustrations
Another factor in the design and selection of the lift, compact/lightweight/powerful, is the ratio of the lift capacity to the physical size of the lift.
\"It\'s worth strolling around.
The first time I saw what worked best for us.
The hoist magnets we buy now have greater load capacity than the other units we used in the past.
Smaller lifts around our machining center are easier to operate, \"suggested senior foreman.
\"We can better manipulate the parts, and the ergonomic aspects of these lifts are also better. \" Electro vs.
Permanent magnet lifts and magnets are clear competitors.
They all use magnetic forces, which in theory can be made to meet any need for lifting capacity.
However, their demand for an external power supply may pose a safety issue: electrical connections may be damaged or fail.
A power outage may not be just a temporary fault at the scrap metal plant, but it may have catastrophic changes in the manufacturing workshop.
At the spring steel plant in Kansas, the management tried the basic induction device, but it turned out that the device was unreliable and replaced by a magnetic lift.
Permanent magnet lifts do not have electrical connections that are potentially dangerous, nor do they have tail cables.
According to the manufacturer, since they are not affected by power failure, there is no need to use inconvenient chains or straps.
In most cases, their permanent magnets are fully shielded by the shells that encapsulate them and do not lose their magnetism under normal working conditions.
Some manufacturers make in failure
Safety Mechanism: once the magnet is \"flipped\" through the rotating control handle, fault-
A safe mechanical positioning mechanism is designed to ensure that it is \"closed\" accidentally \".
Some lifts are also fully insulated from magnetic properties to prevent problems from being dealt with when approaching black structures or parts.
The senior foreman of the rotaryactuators manufacturer in Washington said, \"with the magnetic lift, we not only work faster ---
Our work is also safer.
We don\'t need to move heavy, sharp.
The part of the edge tries to get around the strap and we don\'t have to worry about the consequences of the greasy strap sliding out of the position.
\"Bunting magnetic companywww. rsleads. com/411mn-
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...